Table of Contents
Advertisement
68
Chapter 5
Using Pipeline with FlipFactory
Table 5–2. Capture tab controls and descriptions.
Control
Metadata fields
Automatic Time Code
Mark In
Mark Out
Duration
Video
Audio
Add to Queue
Close
Manual
Duration
Flip It!
Description
Fill in the editable metadata fields for this clip for submission with the job.
The clip name automatically increments the numeric suffix on the name.
Select when you want to specify a mark-in and mark-out point to capture.
The tab displays Add to Queue and Close buttons at the bottom.
Use VTR controls to control your video, click Mark to capture the mark-in
value, or enter the value in the HH:MM:SS:FF field and click GOTO to
jump to this timecode.
Non-drop-frame timecode separators are all colons. Drop-frame notation
applies a semi-colon between the second and frame values. For
example: 00:29:30;16 is a drop-frame timecode.
Use VTR controls to control your video, click Mark to capture the mark-
out value, or enter the value in the HH:MM:SS:FF field and click GOTO to
jump to this timecode.
Displays the current length of the clip, based on the difference between
the mark-in and mark-out values. If you manually edit the duration, the
mark-out timecode is automatically adjusted to compensate for the
change.
Check to capture the video stream.
Check to capture the audio stream.
Click to submit a job. These jobs are held for processing until the Pipeline
is free (the Capture Editor is closed). If you have checked Defer in the
Submit Job window, the job will be processed according to the schedule
you set. Otherwise, it will be processed as soon as possible based on
scheduling priorities in FlipFactory and availability of the Pipeline.
Multiple clips can be queued up. When all clips are queued, click Close.
Click to close the Capture Editor, disconnecting from Pipeline and freeing
it for attachment by FlipFactory and allowing all queued jobs to process.
Select when you want to crash record from the current stream.
Specify the duration of the clip to capture.
Click to submit a job to FlipFactory for processing. If you have checked
Defer in the Submit Job window, the job will be processed according to
the schedule you set. Otherwise, it will be processed as soon as possible
based on scheduling priorities in the FlipFactory and availability of the
Pipeline. Flip It! closes the Capture Editor immediately to free the
Pipeline and allow Pipeline jobs to be immediately processed.
March, 2009
Advertisement
Table of Contents
