Pipeline SC User Manual page 21

Use this chapter to unpack and set up Pipeline SC, Pipeline Quad, and Pipeline HD Dual devices, connect
video equipment, and configure the Pipeline for a LAN connection. Before proceeding, work with your
network administrator to determine network setting requirements: IP address (automatic link-local, DHCP,
or static) and netmask, and the gateway address. You should also understand your media workflow
requirements and read Network and Hard Disk Performance Requirements (page
Note
Topics in this chapter refer to all Pipeline devices unless specifically noted.
To set and configure your Pipeline correctly, complete the tasks in this chapter, referring to
Using the Configure Panel on page 40
Topics
Environmental Operating Requirements (page 6)
Power Requirements (page 6)
Unpack the Pipeline (page 6)
Locate the Pipeline SC (page 7)
Locate the Pipeline Quad | Pipeline HD Dual (page 7)
Pipeline SC Hardware (page 8)
Front Panel Indicators (page 8)
Rear Panel Ports and Connectors (page 9)
Pipeline Quad Hardware (page 9)
Front Panel Indicators (page 10)
Rear Panel Ports and Connectors (page 11)
Pipeline HD Dual Hardware (page 12)
Connecting Pipeline Directly to Mac OS X or Windows Computers (page 16)
Adding Pipeline to a Network (page 17)
Powering up the Pipeline (page 17)
Configuring & Connecting to Pipelines (page 18)
Configuring Pipeline Network Settings (page 18)
Installing Bonjour for Windows (page 18)
Connecting to Pipeline via Bonjour (page 19)
Connecting via IP Address (page 19)
Register Your Pipeline (page 20)
P i p e l i n e H a r d w a r e ,
I n s t a l l a t i o n & S e t u p
for network configuration tasks.
C
H A P T E R
29).
Chapter 4,
5
2