Table of Contents
Advertisement
Sync Out.
Re-clocked loop-through port of SDI Sync In. You can use this re-clocked reference for
additional Pipelines or other devices.
RS-422.
Female DB-9 RS-422 port for VTR, using Sony 9 Pin Protocol (one per channel).
SDI In.
BNC jack for SD-SDI or HD-SDI input (one per channel).
SDI Out.
BNC jack for SD-SDI or HD-SDI output (one per channel).
Gigabit Ethernet Ports.
right, green LED is lit, the port is operating at 1Gbs (gigabit). If you only connect Ethernet to the Channel 1
port, the second channel is accessible, but all traffic flows through the only connection (channel 1).
This may cause performance problems. If so, connect a Ethernet cable to the second Ethernet port. If only
the orange LED is lit, the Ethernet port is not connected. Be sure to use CAT-6 cabling end-to-end from
Pipeline to your Macintosh or Windows PC client for best results.
Caution
If only the green LED is lit or the LED is unlit, the Pipeline is operating at 100 or
10 Mb respectively. These data rates are unacceptable for real time video traffic
from all four channels. Resolve the problem by connecting at 1 Gb/sec before
processing jobs to avoid data loss.
74-0085-05
Each Ethernet RJ-45 jack has two LEDs: If the left, orange LED is lit and the
Pipeline HD Dual Hardware
Pipeline User's Guide
15
Advertisement
Table of Contents
