Important Warnings; Installation; Protection Measures Instructions Obligatory For User; Conditions, Under Which Device Complies With Stability Requirements - FUTUR3D 3Dwarf User Manual

23.4 IMPORTANT WARNINGS

1. Printer must be placed on flat surface
2. Back side of the printer with vents has to be in the distance of at least of 30cm (for
proper cooling function) from the wall or other obstacle
3. When done printing, do not leave polymer in the tank
4. Always shake the polymer before printing
5. Mirrors must be kept clean and without dust
6. Do not eject tank before platform removal. Mirrors might be soiled
7. Never use sharp items on the bottom of tank. Separation layer might be damaged.

24 Installation

(device installation requirements)
• Device installation is performed in accordance with manufacturer's documentation

25 Protection measures instructions obligatory for user

(including protection measures, which have to be provided)
• Operating staff must use protection measures during device operation – type is to be
defined by device user
26 Conditions, under which device complies with stability
requirements
(during usage, transportation, assembly, disassembly when not used, testing or in case of
unpredictable malfunctions)
• Weight distribution of the device ensures sufficient stability against overturning
• Device must be placed on solid surface with gradient lesser than 1 degree
Stránka 35 z 39