Print Preparation - FUTUR3D 3Dwarf User Manual

Click on Shutdown icon and then after 20s turn off the printer using the main button. After
Turn on printer will be connect on the interent and intranet. Then you can disconnect LAN
cable RS-45.

23.2 PRINT PREPARATION

• It is important to have well-designed model, which we want to print, prior actual
printing. This model has to be in .stl format, in accordance with description present
on USB device and inserted into DWARF slot. The printer automatically loads the
model from USB at start-up. If everything is set correctly, no further user's action is
needed. Printer automatically follows exposition mode and layer height, in
accordance with parameter setup of your model on USB.
• The keystone is model in STL format. Follow
(http://www.futur3d.net/pravidla-3d-modelovani-a-tvorba-stl-souboru)
1. Model design preparation in Creation Workshop program. Program is open source
and is downloadable at here.
basic modelling rules for 3D
Stránka 24 z 39
printing.