If Something Goes Wrong; Before You Call For Service - GE WZSE5310T Owner's Manual

Beeps
26

If Something Goes Wrong

Before you call for service

Your washer can diagnose its own problems. If the washer gives a short burst of
beeps every 5 seconds it is telling you that it has a problem which you can correct.
NOTE:
A short burst of beeps will also be heard when the washer is plugged in.
If the washer gives a
short burst of beeps and... Possible Causes and What to Do
Hot water temperature light
is flashing
Cold water temperature light
is flashing
Cold and Hot water
temperature lights are flashing
High water light is flashing
Water Saver light is flashing
• The hot water faucet has not been turned
on. (If the Cold water wash setting has been
adjusted in the Option Adjustment Mode
the hot water faucet must be turned on.)
• Hot water supply is not hot enough to main-
tain the wash temperature you have selected.
Select a lower wash temperature.
• Inlet hoses are improperly connected. Make
sure they are connected to the correct faucets.
• Cold water faucet has not been turned on.
• Inlet hoses are improperly connected.
Make sure they are connected to the
correct faucets.
• Faucets have not been turned on.
• Inlet hoses are improperly connected. Make
sure they are connected to the correct faucets.
• The machine is overloaded and cannot
agitate. Remove clothes until the remaining
clothes can move freely.
• The washer has a suds build up. Too much
detergent has been used for the amount of
soil in the load or the household water is
very soft.