GRAUPNER 2201 User Manual
GRAUPNER 2201 User Manual

GRAUPNER 2201 User Manual

72ft yacht

Advertisement

Quick Links

72 ft Yacht
Order No.: 2201

Advertisement

Table of Contents
loading

Summary of Contents for GRAUPNER 2201

  • Page 1 72 ft Yacht Order No.: 2201...
  • Page 2: Table Of Contents

    Assembly instructions ....................... 10 Foreword Thank you for choosing to purchase the Graupner model "72 ft Yacht", order no. 2201. Graupner models stand for high quality. We pay great attention to stability at the key points in series production. Due to extensive prefabrication, including motor and rudder system, as well as the high degree of detail made possible by the CNC processing, this model replicates the original yacht very closely.
  • Page 3: Model Summary Description

    25 years. • This is one of the models in the GRAUPNER PREMIUM product line series, the series of particularly high quality finished models offering a degree of detail previously unachieved on the market.
  • Page 4: Intended Usage

    This is a model that – together with appropriate accessories – can become a functional RC model. GRAUPNER cannot monitor adherence to the assembly and operating instructions for the model nor can GRAUPNER supervise the installation, operation or maintenance of the model and its components.
  • Page 5 Protruding model parts can be sharp and the antennas and masts can cause eye injuries. Attention! Pay attention to the potential dangers associated with the tools that are used. GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY No liability for printing errors. Technical changes reserved! 03/2012...
  • Page 6 Never operate the model on strongly moving water (e.g. a river) as the model may drift away if it becomes disabled. Attention! Never endanger yourself or others in an attempt to recover the model. GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY No liability for printing errors. Technical changes reserved! 03/2012...
  • Page 7: Conformity Declaration

    Care! Clean the model after every use. Remove any water which may have intruded. If water has gotten into RC components, lay them out to dry then send them to the responsible GRAUPNER service center for inspection. Care! Clean the model and transmitter only with suitable cleaning materials. A lint-free cloth is suitable. Never use chemical cleaning agents, solvents, gasoline, spirits or similar.
  • Page 8: Environmental Protection Notices

    If there should be an evident material or processing defect in one of the objects marketed in the Federal Republic of Germany and purchased by a consumer (§ 13 BGB) we, the company Graupner GmbH & Co KG, Kirchheim/Teck, accept responsibility for eliminating the object's defect within the scope as specified below.
  • Page 9 German substantive law without the norms of international private law and under exclusion of applicability for the UN Convention on the International Sales of Goods. GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY No liability for printing errors. Technical changes reserved!
  • Page 10: Assembly Instructions

    The superstructure of the 72 ft Yacht is a single piece and can be removed completely. The superstructure must be removed to perform maintenance and install RC components. GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY No liability for printing errors. Technical changes reserved!
  • Page 11 IMPORTANT: To assure good reception, the antenna must be routed as close as possible to the hull's rim! The GRP hull diminishes reception only very little. GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY No liability for printing errors. Technical changes reserved!
  • Page 12 ATTENTION: Be sure to secure the cover good as otherwise water may intrude into the model and do irreparable damage or even cause loss of the model. • Put the superstructure back onto the hull. GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY No liability for printing errors. Technical changes reserved! 03/2012...
  • Page 13 LiPo battery V-MAXX45C 3/3300 11.1 V G3.5 2970 Plug G3.5 gold-plated (2 pcs.) 2969.K Housing G 3.5 7195 Regulator, VariateurProfi V80R Order no. 3368 Hook- and loop ribbon (Velcro) GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY No liability for printing errors. Technical changes reserved! 03/2012...
  • Page 14 GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY No liability for printing errors. Technical changes reserved! 03/2012...

Table of Contents