Speaker Controls - Altec Lansing M302 User Manual

Turn on your speaker system
Increase LCD display brightness
Decrease LCD display brightness
Change audio source
Turn up the volume
Turn down the volume
Recall preset FM station
Listen to a non-docking iPod or MP3 player
View the date
Ensure the AC adapter is connected to the system and plugged into the wall. See the Getting Started
section for more information. Momentarily press the STANDBY button.
Press the button to brighten the LCD display.
Press the button to dim the LCD display.
Press the SOURCE button to cycle through and select the audio source: iPod, FM or AUX.
NOTE If you are in "FM" or "AUX" mode and you dock your iPod, the speaker system will automatically
change to "iPod" mode.
NOTE If you are in "iPod" mode and playing your iPod, changing audio sources will automatically pause
your iPod.
NOTE If you are in "FM" mode, pressing the SOURCE button once will have no effect. You will need to
press it a second time to change the audio source.
Press the VOLUME + button. Press and hold the button to quickly adjust the volume.
Press the – VOLUME button. Press and hold the button to quickly adjust the volume.
In "FM" mode, press the SOURCE button to activate the preset selection feature. The "FM" source icon
will flash. Press the or
Radio section for additional information.
See the Listening to a Non-docking iPod or Other Portable Audio Device section for specific information
on using devices attached to your speaker system's AUX IN connector.
Momentarily press the TIME button to display the year. Press the TIME button again to display the month
and day. Press the TIME button again to display the day of the week.
buttons to select the desired preset station. See the Listening to the

Speaker Controls

7