Listening To A Non-Docking Ipod Or Other Portable Audio Device - Altec Lansing M302 User Manual

If you have a non-iPod MP3 player or other non-docking portable audio
device, you can enjoy it through your Altec Lansing Moondance Home
speaker system as well. Just connect it via the AUX IN jack. Here's how:
1
Locate a 3.5 mm stereo cable
(not included).
2
Plug one end of the stereo cable
into your device.
Your device should have either a
headphone or LINE OUT jack for you
to plug into.
3
Plug the other end of the stereo
cable into your speaker system's
AUX In jack.
The AUX IN jack is located on the back of the unit.
4
ensure your speaker system is powered on.
If the system isn't on, press the STANDBY button on the speaker
system or the button on the wireless remote.
5
Select "AUX" mode.
Press the SOURCE button on your speaker system or the SOURCE
button on the wireless remote until the AUX appears on the LCD.
6
Turn on your device and start it playing.

Listening to a non-docking iPod or Other Portable Audio Device

FM
AUX IN
POW ER
7
Adjust the volume.
Use the VOLUME + and – VOLUME buttons on the Altec Lansing
Moondance Home speaker system to adjust the system volume. Or,
use the and buttons on the wireless remote.
NOTE You may need to adjust the device volume also. Your device's
volume should be set to approximately ¾ volume.
8
When you are finished listening to your portable audio device,
please remember to turn both it and your speaker system off
to conserve electricity.
13