Setting the Sleep Timer
Your Altec Lansing speaker system is equipped with a sleep timer that
automatically turns off the unit 30, 60, 90 or 120 minutes after it has been
set.
How to Set the Sleep Timer
1
ensure your speaker system is powered on.
If the system isn't on, press the STANDBY button on the speaker
system or the
button on the wireless remote.
2
Press the SLeeP button.
This puts you in the Sleep Timer mode.
3
Select the sleep duration.
Press the SLEEP button to cycle through the available sleep duration
times: 0, 30, 60, 90 and 120 minutes. Selecting 0 minutes is the
equivalent of turning the sleep function off.
4
exit the Sleep Timer mode.
The speaker system will automatically exit the Sleep Timer mode after
5 seconds of inactivity. Or, press the ENTER button on the wireless
remote to exit the Sleep Timer mode.
Maintaining Your Speaker System
Place your speaker system on a level surface away from sources of direct
sunlight or excessive heat.
Protect your furniture with a cloth or other protective material when placing
your speaker system on a natural wood or lacquered finish.
Clean your speaker system with a soft cloth moistened only with mild soap
and water. Stronger cleaning agents, such as benzene, thinner or similar
materials, can damage the surface of the unit.
17