Setting Line Ring Type And Delay - LG-Nortel IP8815 User Manual

Press the Setting (
o
Dial 3, or move the cursor to
o
OK softkey.
Dial 2, or move the cursor to
o
softkey.
Dial 1, or move the cursor to
o
Previous-Next softkeys and press the OK softkey. An asterisk,
, displays in front of the current setting.
Select the ring type using the Next softkey. Press the Play
o
softkey to hear the selected tone.
Press the OK softkey to save the selected the ring type.
o
Move to another parameter with the Return button,
o
continue the session or press the Settings (
the configuration session.

5.2.2. Setting Line Ring Type and Delay

You can assign each line with a different ring type (tone) to distinguish which line is ringing. Selections
for the type include one of up to fourteen tones, "Ringer Off" or "Set to Default", see
fourteen tones, nine are permanently stored in the memory of the phone and the remaining five must be
downloaded before use. In addition, for each line the ring signal can be immediate or delayed. The delay
is set in 1 second increments from 0 (no delay) to 10 seconds.
To set the ring type for a line:
Press the Setting (
o
Dial 3, or move the cursor to
o
OK softkey.
Dial 2, or move the cursor to
o
softkey.
Dial the Line number plus one (2 for Line 1, 3 for Line 2, etc.), or
o
move the cursor to
Next softkeys and press the OK softkey. The value of
Line button number.
Dial 1, or move the cursor to
o
Next softkeys and press the OK softkey. Note the line number
displays in parenthesis after "Ring Type".
Select the ring type using the Next softkey. Press the Play
o
softkey to hear the selected tone. An asterisk,
front of the current setting.
Press the OK softkey to save your entry.
o
Move to another parameter with the Return button,
o
continue the session or press the Settings (
) button.
3.Phone Settings
2.Ring Setting
1.Default Ring Type
) button.
3.Phone Settings
2.Ring Setting
n
Line Configuration
1.Ring Type
14
using the Previous-Next softkeys and press the
using the Previous-Next softkeys and press the OK
using the
, and
) button to exit
using the Previous-Next softkeys and press the
using the Previous-Next softkeys and press the OK
using the Previous-
n
is the
using the Previous-
, displays in
, and
) button to exit
IP8815 Nortel IP Phone
User Guide
Jan 23
Ring Setting
>1.Default Ring Type
2.Line 1 Configuration
Previous Next
Jan 23
Default Ring Type
*Type 1
Play Next
section 5.2.1. Of the
Jan 23
Ring Setting
2.Line 1 Configuration
>3.Line 2 Configuration
Previous Next
Jan 23
Line 2 Configuration
>1. Ring Type
2. Delayed Ring Timer
Previous Next
Jan 23
Ring Type (2)
*Set to default
Play Next
08:30
OK
08:30
OK
08:30
OK
08:30
OK
08:30
OK
Jan. '09