Differential Ring Signals - LG-Nortel iPecs LIP-8012D User Manual

LIP-8012D & LIP-8024D User Guide
To screen a ca
• Press the
broadcast
voice mail
automatic
To stop the vo
Mail:
• Press the illuminated
To talk with the caller and r
Vo ice Mail:
• Press the
To answer the call and can
recording:
• Press the illuminated
connected and the Voice Mail disconnected.
3.4

Differential Ring Signals

Ring mode—the Answering Machine Emulation (AME)
Flex button will flash to notify you of a call. You may
press the Flex button to hear the caller as the voice
message is stored.
Speaker mode—when the call is sent to the voice
mailbox, the caller's voice is automatically broadcast
over the speaker of your iPECS Phone.
You may terminate screening, leaving the caller in voice
mail to record a message, talk with the caller and record
the conversation in the mailbox, or answer the call and
disconnect the Voicemail.
available wh en using the iPE
a M and AME button should be programmed (refer
UTE
to Appendix A User Program Codes).
ll in Ring mode:
flash ing button, the caller's voice is
AME
over the station speaker and stored in the
box (in the Speaker mode, broadcast is
).
ice broadcast and leave the ca
SP EAKER
button.
MUTE
cel the voice message
AME
When multiple phones in a small area ring, it can be
difficult to tell which are ringing. The iPECS Phone has
14 Ring Tones available for differentiating one phone's
ringing from another. Four of the tones are stored in the
phone permanent memory; the remaining ten tones are
in the system memory.
downloaded into the phone memory for use as the 5
th
8
Ring Tone.
The AME feature is only
CS VMIM/VSF Voice Mail;
button.
ecord the conversation in
button, the caller is
Four of these ten can be
17
Issue 1
ller in Voice
th
to
August, 2008