Table of Contents
Advertisement
The following fault messages appear in the display and the
programme stops
Fault message
Drain
fault
;
Water inlet
fault
;
Waterproof
fault
;
Technical
fault
;
A To switch off the fault message: Switch the machine off with the K button.
Possible cause
– The water outlet is
blocked or restricted.
– The drain hose has
been fixed too high.
The water inlet is blocked
or restricted.
The filter in the water inlet
hose is dirty.
The water protection
system has reacted.
There is a fault.
Problem solving guide
Remedy A
– Clean the drain filter and
the drain pump.
– The maximum delivery head
is 1 m.
Check whether
– the stopcock is opened
properly.
– the inlet hose is kinked.
– the water pressure is too
low.
Clean the filter.
– Close the stopcock.
– Call the Service
Department.
Start the programme again.
If the fault message appears
again, contact the Service
Department.
41
Advertisement
Table of Contents
