Handset Settings; Directory - AT&T E5934B User Manual

Highlighted
menu item
>DIRECTORY
CALL LOG
RINGER VOLUME
RINGER TONE
1
KEY TONE
ON
Telephone operation

Handset settings

Using the feature menu you can change settings to
customize how the telephone works.
Press , then use the
MENU
the feature you want to change. As you scroll through
the menu, the top menu item is always highlighted with
a > symbol. Press
SELECT
Press at any time to cancel an operation, back up
OFF
to the previous menu, or exit the menu display.
Ringer volume
Using this menu you can set a ring volume level (1-6), or
turn the ringer off (0). Use the
a sample of each volume level, then press
select the one you prefer.
— OR —
When the handset is in idle mode, press VOLUME
^V
buttons on the right side of the handset to
change ringer volume directly.
NOTE: The ringer volume level also determines the levels of ringing for
intercom calls (see page 15) and the paging tone when initiating the
Handset Locator feature (see page 12). If the handset ringer volume level is
set to off (0), that handset is silenced for all calls and paging.
Ringer tone
This feature allows you to choose one of 10 ringing
V^
tones. Use the
ringer tone, then press
prefer.
Key tone
The handset is factory programmed to beep at each key
V^
press. Use the
press to save your preference.
SELECT
NOTE: If you select OFF, you will not hear the beep tone when you
press keys.
18 18
V^
buttons to scroll to
to select the highlighted item.
V^
buttons to hear
buttons to hear a sample of each
to select the one you
SELECT
buttons to select
to
SELECT
or , then
ON OFF