Dismantling / Jumper Setting - Violectric dac v850 User Manual

DISMANTLING / JUMPER SETTINGs
Hint:
Here we are talking about internal adjustments inside your DAC V850.
You are in need of a screw drivers TORX style size T10 or a 3mm hex
allen key.
You should by all means
PULL THE MAINS PLUG !!!
Only thereafter the settings can be altered without any hazard.
DISMANTLING
To avoid damages please follow the instruction below:
1. screw off both upper screws on the front panel
2. screw off both upper screws on the back panel
3. unscrew the two lower screws on the front panel about 2-3 mm
4. the front panel can be tilt afterwards by some degrees
5. now lift the upper lid
6. make your personal jumper settings
Assemble the unit in reverse order
24