Violectric dac v850 User Manual page 16

clock source. Therefore inside DAC V850 a special low jitter oscillator
with typical < 1 pS (Picosecond !) phase jitter is used.
The oscillator is powered by a low noise source made of discrete
components. By means of this process, all potential jitter vanishes
almost completely and - due to the higher sampling rate - the analog
filters after the converter stage can follow a much more straightforward
and "musical" design. Furthermore, all digital input signals will be
completed to 24 bit.
THE RESAMPLING BUTTON
By pressing the "RESAMPLING" button, the modes OFF > x1 > x2 > x4
> BEST can be stepped through in clockwise order.
- OFF
lights up when the resampling function is deactivated. The digital input
word is forwarded to the D/A converter without alteration.
- x1
The yellow "x1" LED indicates that the resampling function is activated.
The digital input word will be recombined and forwarded to the D/A
converter at original sample rate.
- x2
The yellow "x2" LED indicates that the resampling function is activated.
The digital input word will be recombined and forwarded to the D/A
converter at twice the original sample rate.
If the input sample rate exceeds 110 kHz (176.4, 192 kHz), the unit
switches back to "x1" mode automatically.
16