Violectric dac v850 User Manual page 20

Setting another address for the remote control
Sometimes it may be meaningful to alter the address of the remote
control because there is interaction with other devices at your home.
Ex works the remote control is set to
address proceed as follows: push and hold the "INPUT SELECT" button
for about two seconds. Afterwards the "LOCK" LED flashes constantly
and the address lights up as follows:
Address 1
Address 5
To alter the address push (repeatedly) the "INPUT SELECT" button.
To finalize your settings push the "INPUT SELECT" button for two
seconds and the blue "LOCK" LED stops flashing.
HINT:
Please keep in mind to also alter the setting of the remote control itself.
To do so, please follow the instructions of the remote control.
"Address
Address 2
Address 6
20
2". To select another
Address 3
Address 7
Address 4
Address 8