Table of Contents
Advertisement
Furthermore, analog output level is controlled by means of a potentio-
meter on the front panel. Its setting is translated in the digital domain
only, thus excluding any kind of scratching, crosstalk or gang errors.
THE REMOTE CONTROL OPTION
can control the following functions:
- Volume - for this purpose a motorized potentiometer has been
installed. Pushing the dedicated volume-control buttons on the
remote control or the left/right buttons of the circular control pad will
alter the volume.
- Input selection - to directly select one of the 4 input channels push
the buttons 1 – 4 on the remote control or the + / - buttons from the
channel control or the up/down buttons of the circular control pad.
- Resampling functionality - is altered by pushing the red, green,
yellow or blue button on the remote control. The selected function
can be enabled/disabled by a repeated push on the same button.
- Mute - The Mute function is not present on the V850 front panel
itself. But a mute can be released by the affiliated button on the
remote control. The activated mute is displayed by the red
Mute/Error LED on the front panel.
PROGRAMMING
Some functions of DAC V850 are programmable.
If - of any reasons - nothing seems to work as it should any more,
follow these instructions to come back to DEFAULT SETTINGS:
Push and hold the "INPUT SELECT" button whilst powering the
unit. Soon after all LEDs on the front panel will light up.
Now you can release the "INPUT SELECT" button as all settings
had been reset to default.
19
Hide quick links:
Advertisement
Table of Contents
