Violectric dac v850 User Manual page 13

THE DIGITAL OUTPUT
is located on the rear panel. It is fitted with a RCA socket according to
IEC 958, unbalanced, at 75 ohms output impedance. The level at this
output however complies with AES-3-id (1 Vss).
The data word on this output is the same as on the selected input by
default. But the output data may also be processed nearly free of jitter
by the resampling module.
To change the mode of the digital output see page 21 "special settings".
All options for the digital output are listed below:
Input Resampling
Sample-Rate
28 - 55 kHz Follows input
55 - 110 kHz Follows input
110 - 210 kHz Follows input
Hint:
When the resampling mode is active, also the volume from the digital
output signal will be attenuated by the front mounted attenuator or the
remote control.
Hint:
When the digital output is set to "Resampling Mode: ON", but the
resampling action on the front panel is set to "OFF" - than the digital
output is muted.
Mode:OFF
1x
48kHz
96kHz
192kHz
Resampling Mode: ON
2x 4x
96kHz 192kHz
192kHz
x
13
BEST
96kHz
x 96kHz
x 96kHz
OFF
no
Signal