Abbott FreeStyle Navigator User Manual page 69

66 Section 9
Set, Review, or Change the Alarm Settings
Steps
8.
Set System Alarms.
Alarm Settings
High Glucose (275)
Projected Low (On)
Projected High (O )
Data Loss
System Alarms
Main
15.3 mmol/L
Decide what settings you want:
• Alarm on or off.
• Alarm type (Setting).
– Low, medium or high beep.
– Short, medium or long
vibration.
08:30
Select
If
• You have setting, reviewing or changing
all alarms.
• You are finished setting, reviewing or
changing alarms.
Do This
Important: If you turn off the System Alarms, the receiver
will NOT prompt you to do the calibration tests after you
insert a new sensor.
a. Select System Alarms from the Alarms menu.
b. Review or change your settings.
• Press the LEFT Option button (Next) to move
from one field to the next.
• Use the UP/DOWN Arrow buttons to change
the setting in any field.
• Press the RIGHT Option button (Set) to accept the
settings and return to the Alarms menu.
Note: The receiver will respond with a brief sample
of the alarm you selected.
c. Decide what to do next.
Continue to the next step.
Go to Step 11.
Then