York YEHJZH009-24BAM1ABX User Manual page 31

Installation of indoor unit
2. Make the power connection wire go
through the cable-cross hole at the back
of indoor unit and then pull it out from
the front side.
3. Remove the wire clip; connect the power connection wire to the wiring terminal
according to the color; tighten the screw and then fix the power connection wire
with wire clip.
4. Put wiring cover back and then tighten the screw.
5. Close the panel.
Note:
All wires of indoor unit and outdoor unit should be connected by a professional.
for a new one. Avoid extending the wire by yourself.
installation.
The air switch should be all-pole parting and the contact parting distance should
be more than 3mm.
power connection
wire
N(1) 2 3
blue black brown yellow-green
outdoor unit connection
air switch must be installed in the line.
29
cable-cross
hole