Table of Contents
Advertisement
G. OPERATING INSTRUCTIONS
For Maximum Efficiency
•
Close doors and windows.
•
Keep curtains and blinds closed during the sunniest part of the day.
•
Regularly clean filters.
•
Once room has reached the desired conditions, reduce temperature and
ventilation settings.
1.
ON/OFF (power) button
2.
Timer button
3.
Timer operation indicator
4.
'Temperature up' button
5.
Indicator for compressor
6.
"Water Full" indicator
7.
'Temperature down' button
8.
Low fan setting indicator
Turning ON/OFF
1. Press ON/OFF button, the unit will start automatically. If the ambient
temperature is
o
-
higher than 23
C, the unit will work in cooling model.
o
-
higher than 20
C but below or equal to 23
ventilation model.
2. Indicators of the functions in progress come on at the same time. NOTE
The display window shows the ambient room temperature from 0
o
to 50
C
3.
To turn the unit off, press ON/OFF button again.
9.
High fan setting indicator
10. Fan mode indicator
11. Cooling mode indicator
12. Automatic mode indicator
13. Mode (function) option
button
14. Speed (ventilation)button
15.
Display window
16.
Receiver for remote
control
o
C , the unit will work in
Setting mode/function
Press MODE button to select required working mode: automatic, cooling or
fan. The indicator of your selected mode comes on.
Setting temperature
1.
Press 'Temperature up' or 'Temperature down' button to set the desired
temperature.
2.
The display window will show the temperature you set as you press
'Temperature up' or 'Temperature down' button. Otherwise, it will always
show the ambient temperature.
3.
The pre-set temperature of this machine is: 24
Setting ventilation speed
1.
Press SPEED button to choose the ventilation speed you (high or low).
The speed indicator light will indicate which speed setting is in use.
2.
If the unit is in AUTO mode, it will choose the ventilation speed
automatically according to the ambient temperature (the related
indicators will light on), at this time, the speed switch is invalid.
Setting timer
1.
Press TIMER button to set your desired running time . The timer
indicator will illuminate to show the number of hours selected.
When the running time has ended, the air conditioner will turn off
automatically. The display window will show the hour(s) you set
as you press TIMER button. If the timer button is not pressed, the
unit will work continuously.
2.
By pressing the timer but without turning on the other functions,
you can PRE-SET the time for the machine to work. For example,
if you press the timer to '2', the unit will work automatically after 2
hours.
o
C
o
C for cooling
Hide quick links:
Advertisement
Table of Contents
