Electra Light Beam 300 User Manual page 7

BEAM 300
_____________________________________________________________________
3 core plug :
3 ：
3 core plug :
3 ：
5 5 core plug: ：
DMX512 signal circuit:
Pin 1 = screen
The Instruction Manual for Computer Lightings
The menu of control display boards is designed for various types of computer lights, equipped
with multiple functions of control mode, and controlled easily.. For some special functions which
computer lights don't have, the corresponding menu option set is invalid.
1 DMX512（Address Value Setting）
This function let you to change the address value of the device.
1.1 Press the "ESC" button once or several times, until "A.001." appear. Then press the
"up" or "down" keys to browse other menus.
1.2 Press "enter" key, the letter "A" crush out; Use "up" or "down" keys to select the
address value "001--512"; Press "ENTER" to confirm exit, press "ESC" to abandon
exit.
1.3 To accept the mainframe synchronous (from the models), you have to set the address
value as "001".
1.4 In the address value situations, if you install DMX controller without connecting, the
display will twinkle; if you install connecting DMX controller, the display will not
twinkle; but the signal light will twinkle , only the signal is exist.
Pin 2 = signal- Pin 3 = signal+
3 core pl ug:
3 ：
5 5 core pl ug: ：
3 core pl ug:
3 ：