Table of Contents
Advertisement
BEAM 300
_____________________________________________________________________
！
Please consult eligible persons before maintenance
！Please make sure the power supply has been cut off during installation, maintenance, and
transportation.
！Please do not use power supply and lamps of different specifications.
！ During operation, the high temperature the light create might lead to danger, therefore please
don't put any inflammable and explosive things around the light, and please don't touch the
light body during operation.
！Make sure there is more than 1 meter between the light and the irradiated objects.
！In order to avoid harming your eyes, please do not look at the light beam directly
The product is suitable for indoor use only, operation temperature is below 35 degree.
●
The installation, operation and maintenance persons must get familiar with the light
●
performance before operation, so that to avoid damage to the machine.
Please check if there is any damage during transportation before first usage.
●
Before changing the bulb, please make sure the electric power is cut off and the lamp is
●
cooled off. (Bulb temperature can reach above 200 degree.)
Push the maintenance cover, open the small bulb lid, encase the bulb, please note to put the air
●
bulb side up, please don't touch the bulb by hand.
Cover the small lid.
●
Install the product in well ventilated places and please note to check whether the fan and the
●
fan net are unimpeded or not.
Connect the bicolor line (yellow and green) to the ground.
●
Safety instruction
Installation Instruction
Advertisement
Table of Contents
