Related Manuals for Electra Light Atomic 3000 DMX
Summary of Contents for Electra Light Atomic 3000 DMX
- Page 1 USER MANUAL STROBE 3000 DMX Professional lighting ELECTRA LIGHT LTDA. WWW.ELECTRALIGHT.COM.BR Please read over this manual before operation the light...
- Page 4 Remote Control DETONATOR MODE Setting Master Mode Remote Control Remote Control Strobe...
-
Page 5: Remote Control
REMOTE CONTROL Remote Control Remote Control... - Page 6 Blinder effect(1-255) Intensity control(1-255) Spikes(1-255)
- Page 7 Stand-alone mode Flash rate control(1-255)
-
Page 8: Lamp Replacement
replacement lamps Melight that have beenprepared for with User only from ionization lamps without ionization will not work:. wire. XOP wire whenever the combination of flash duration rate prevents pauses between flashes. For example, the blinder effect can be achieved with a flash duration of 0.25 seconds (250 ms) and a flash rate of 4 flashes per second, or a flash duration of0.05 seconds (50 ms) and a flash rate... -
Page 9: Dmx Control
CONTROL SUMMARY CONTROLLER OPERATION For specific command values, see ''DMX protocols" on page 20. INTENSITY Flash intensity can be set from minimum (blackout) to maximum on channel 1 in the 3- and 4-channel DMX modes. Intensity is maximum in 1-channel DMX This section describes how to operate the Strobe 3000 with DMX controller. -
Page 10: To Set The Dmx Address
To set the DMX address To set the DMX address The first lamp The second table lamp The third table lamp...
Need help?
Do you have a question about the Atomic 3000 DMX and is the answer not in the manual?
Questions and answers