Site Installation; Unpacking Tiger Serve1 - Tiger Serve1 Assembly Manual

Tiger Serve1 Assembly Guide
Rear View
The back of the appliance features the following elements:
• 2 x power supply modules.
• System power button and system reset button.
• depending on the configuration you have purchased:
• 8 Gb FC ports;
• 10 Gb Ethernet ports;
• 1 x Admin Ethernet port for initial setup of the appliance.
• 1 x Public Ethernet port for public and Internet communication.
Tiger Serve1 supports the following types of cables for connection to the shared
storage and client computers:
• fibre optic or copper SFP (small form-factor pluggable) interconnect cables.
• fibre optic or copper cables with SFP+ (Small Form-factor Pluggable enhanced)
connectors.
• 10/100/1000 Base-T cables with RG45 connectors at each end.
5

Site Installation

Unpacking Tiger Serve1

Do not throw away any of the packaging components, until you
Important:
ensure that the appliance works properly and there is no need to return any
part.
It is advisable to keep all packaging components until the warranty of
Tip:
your appliance expires.
Cut the straps of the box, cut or remove the tape and open the flaps.
1.
Site Installation: Site Installation