Hardware Overview - Tiger Serve1 Assembly Manual

Tiger Serve1 Assembly Guide
• 5 x screws for attaching the rails and the appliance to the rack.
• printed instructions for installing the rails.
• 2 x power cables.
• 1 x 1.80m UTP network cable.
• 1 x front panel bezel.
• 1 x system restore USB flash drive.
• 1 x CD with instructions.
If any of the components listed above is missing from your
Important:
shipment, please contact your reseller or Tiger Technology support
immediately.

Hardware Overview

The pictures used to illustrate the product in this manual may differ from the
Note:
Tiger Serve1 appliance you have received depending on the model and firmware
version.
Technical Characteristics
Description Specification
Net weight approx. 20kg/44lbs
Power Supply Unit High-efficiency 450W, 1 + 1 Redundant
Power Supply with PFC, AC 100~240V Full
Range, 50Hz~60Hz
Temperature Range Operating: 10
Non-operating: -40
Humidity Range Operating: 8%~90% non-condensing
5% ~85% non-condensing
4
º º º º
C~35 C (50 F~94.9 F)
º º º º
C~70 C (-40 F~158 F)
Front View
Tiger Serve1's front features the front panel bezel flanges and the controls of the
appliance:
• System reset button and system power button.
The back of the appliance features a system reset and system power buttons,
Tip:
which can be used instead once you install the front panel bezel.
• USB 2.0 port - for firmware updates and system recovery.
• LED indicators for monitoring system status and connectivity (see "Monitoring the
System Status" on page 13).
Product Overview: Hardware Overview