Table of Contents
Advertisement
Quick Links
Tiger Serve1 Assembly Guide
Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Tiger Serve1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Package Content . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Hardware Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Site Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Unpacking Tiger Serve1 . . . . . . . . . . . . . . . . . . . . . . . . 5
Installing Tiger Serve1 . . . . . . . . . . . . . . . . . . . . . . . . . 7
Installing The Front Panel Bezel . . . . . . . . . . . . . . . . . . . 7
Connecting The Appliance to The Power . . . . . . . . . . . . . 9
Powering On The Appliance . . . . . . . . . . . . . . . . . . . . . . 9
Cabling Tiger Serve1 . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Hardware Monitoring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Monitoring the System Status . . . . . . . . . . . . . . . . . . . . 13
Monitoring Connectivity . . . . . . . . . . . . . . . . . . . . . . . . . 13
Monitoring Power Supply . . . . . . . . . . . . . . . . . . . . . . . . 14
Post Installation Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . 14
Replacing a Failed Power Module . . . . . . . . . . . . . . . . . . 14
Advertisement
Table of Contents
Related Manuals for Tiger Serve1
Summary of Contents for Tiger Serve1
-
Page 1: Table Of Contents
Powering On The Appliance ..... . 9 Cabling Tiger Serve1 ......9 Hardware Monitoring . - Page 2 TO THE TIGER TECHNOLOGY PRODUCTS, AND SPECIFICALLY DISCLAIM THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY, Tiger Technology reserves the right to revise and improve its products as it sees fit. SATISFACTORY QUALITY, AND FITNESS FOR A PARTICULAR PURPOSE. This publication describes the state of this product at the time of its publication, and may not reflect the product at all times in the future.
-
Page 3: Product Overview
Tiger Serve1 Features Congratulations on your purchase of Tiger Serve1, Tiger Technology’s shared storage manager. This manual describes how to install and connect Tiger Serve1 at your site - • 1U, 19” rack-mount chassis. from unpacking the appliance to powering on the system. -
Page 4: Hardware Overview
• 1 x CD with instructions. If any of the components listed above is missing from your Important: Tiger Serve1's front features the front panel bezel flanges and the controls of the shipment, please contact your reseller or Tiger Technology support appliance: immediately. -
Page 5: Site Installation
• 1 x Admin Ethernet port for initial setup of the appliance. • 1 x Public Ethernet port for public and Internet communication. Tiger Serve1 supports the following types of cables for connection to the shared storage and client computers: •... - Page 6 Take the bezel out the foam protectors. Important: Tiger Serve1 weighs approximately 20kg. Attempting to move it without assistance could cause personal injury. Request assistance and use proper lifting techniques when lifting the appliance.
-
Page 7: Installing Tiger Serve1
Install the heaviest devices in the lowest position in the rack. Tip: Installing Tiger Serve1 on a Table Top If you do not plan to install your Tiger Serve1 in a rack, and you opt for tabletop installation, ensure that: • the surface is clean and in a safe location;... - Page 8 Tiger Serve1 Assembly Guide Site Installation: Installing The Front Panel Bezel To install the bezel: Using your index finger, push inward the release latch at each side of the bezel and slightly push the bezel to the front panel until you hear a clicking sound.
-
Page 9: Connecting The Appliance To The Power
Connecting The Appliance to The Power Powering On The Appliance Your Tiger Serve1 is shipped with two power supply modules, installed in the rear of the appliance. These modules supply redundant power to Tiger Serve1 - should a power supply module fail, you can replace it while the system is operating (see “Replacing a Failed Power Module”... - Page 10 Public port as well. Additionally, Tiger Serve1 features an Admin port for connection to a computer, from which to perform the initial setup of Tiger Serve1 (refer to Tiger Serve1 Administration Guide).
- Page 11 If you opt for interconnection via switch, refer to your switch documentation Note: for further setup instructions. To interconnect Tiger Serve1 through the 10GbE port: Your Tiger Serve1 shipment doesn't include copper and fibre optic cables. Note:...
- Page 12 • Plug other end of the cable in the 10GbE port of the Ethernet switch that is connected to client computers. If you opt for interconnection via switch, refer to your switch documentation Note: for further setup instructions. To interconnect Tiger Serve1 through the Public port: Your Tiger Serve1 shipment doesn't include twisted pair cables. Note:...
-
Page 13: Hardware Monitoring
(power is on, but the system is not turned Monitoring the System Status The LEDs on the front panel of Tiger Serve1 allow you to monitor the system status. solid power on You can monitor the system activity without removing the front panel bezel:... -
Page 14: Monitoring Power Supply
Operating as a 100-Mbps connection. Replacing a Failed Power Module Operating as a 10-Mbps connection. Your Tiger Serve1 is shipped to you with two power supply modules, installed in the link LED green blinking There is activity on this rear of the appliance. These modules supply redundant power toTiger Serve1 - should (right indicator) port. - Page 15 Tiger Serve1 Assembly Guide Post Installation Maintenance: Unplug its power cable from the module's socket. Holding the lever of the power module with your index finger, push the side tab to the right and slide out the unit from the appliance.
- Page 16 Tiger Serve1 Assembly Guide Post Installation Maintenance: Insert the new power module until it makes full contact with the enclosure and you Plug the power cable in the module's socket. hear a clicking sound. To check that the power module is properly installed, try to pull it out without Tip: pressing the side tab.