Subscribe to Our Youtube Channel
Summary of Contents for Tiger TIGERFLEX APEX BIKE SHED
- Page 1 TIGERFLEX APEX BIKE SHED - ASSEMBLY GUIDE BEFORE YOU START : MAKE SURE ALL PARTS ARE SUPPLIED. CHECK BASE YOU ARE BUILDING ON IS FLAT & LEVEL. WEATHER CONDITIONS ARE FAVOURABLE FOR ASSEMBLING A SHED. WE WOULD RECOMMEND ASSEMBLY AS A 2 PERSON JOB.
- Page 2 TIGERFLEX APEX BIKE SHED - ASSEMBLY GUIDE 4ft HEAVY DUTY TIMBER FLOOR PANEL 2ft HEAVY DUTY TIMBER BLANK SIDE 4ft HEAVY DUTY TIMBER 2ft HEAVY DUTY TIMBER BLANK SIDE BLANK SIDE NAIL THROUGH FLOOR INSTALLATION & SIDE PANEL ASSEMBLY. •...
- Page 3 TIGERFLEX APEX BIKE SHED - ASSEMBLY GUIDE BLANK SIDE BLANK SIDE NAIL THROUGH SIDE PANEL ASSEMBLY. • SECURE BLANK SIDES TO EACH OTHER IN CORNERS USING 2X 50mm SCREWS PER JOIN. SEE DETAIL A. • SECURE PANELS TO FLOOR USING 65mm NAILS •...
- Page 4 TIGERFLEX APEX BIKE SHED - ASSEMBLY GUIDE DOOR HEADER DOOR SIDE RH DOOR SIDE LH DOOR BASE SCREW THROUGH DOOR PANEL ASSEMBLY. • SCREW HEADERS TO THE SIDES AS SHOWN (LH & RH) 50mm SCREWS - SEE DETAIL C. •...
-
Page 5: Door Installation
TIGERFLEX APEX BIKE SHED - ASSEMBLY GUIDE DOOR HEADER DOOR RAIN COVER DROP BOLT DOOR TOP DETAIL MARK POSITION OF DROP BOLT ON DOOR HEADER AND DRILL HOLE DROP BOLT DOOR INSTALLATION. • LAY ASSEMBLED DOOR SIDE PANEL ON A FLAT SURFACE •... - Page 6 TIGERFLEX APEX BIKE SHED - ASSEMBLY GUIDE DOOR SIDE ASSEMBLY SEE SHEET 3 NAIL THROUGH DOOR ASSEMBLY INSTALL. • SECURE BLANK SIDES TO EACH OTHER IN CORNERS USING 2X 50mm SCREWS PER JOIN. SEE DETAIL A. • SECURE PANELS TO FLOOR USING 65mm NAILS •...
- Page 7 TIGERFLEX APEX BIKE SHED - ASSEMBLY GUIDE 6FT APEX GABLE TOP 6FT APEX GABLE TOP ROOF PANEL ROOF PANEL FIX GABLE TOPS TO THE EXISTING BUILT STRUCTURE • SECURE THROUGH SIDE PANELS USING 2X 50mm SCREWS PER GABLE TOP GABLE TOP ATTACH ROOF PANELS AS SHOW •...
- Page 8 TIGERFLEX APEX BIKE SHED - ASSEMBLY GUIDE FINIAL BARGE BOARD BARGE BOARD BARGE BOARD FINIAL BARGE BOARD BARGE BOARDS & FINIAL ASSEMBLY FELT THE ROOF • FIT BARGE BOARDS TO THE ROOF, TRAPPING OVERHANGING END OF • ROLL OUT FELT ALONG LOWER PART OF ROOF, LEAVING SUFFICIENT THE FELT IN BETWEEN TO PROVIDE A WEATHERPROOF SEAL.
- Page 9 TIGERFLEX APEX BIKE SHED - ASSEMBLY GUIDE COVER LAT COVER LAT COVER LAT COVER LAT COVER LAT COVER LATS & CORNER STRIPS • USE 3X 40mm NAILS TO SECURE IN PLACE - MAKE SURE JOIN IS COVERED • COVER LATS & CORNER STRIPS WILL NEED TRIMMING TO SUIT.
Need help?
Do you have a question about the TIGERFLEX APEX BIKE SHED and is the answer not in the manual?
Questions and answers