Hardware Monitoring; Monitoring The System Status; Monitoring Connectivity - Tiger Serve1 Assembly Manual

Tiger Serve1 Assembly Guide

Hardware Monitoring

Monitoring the System Status

The LEDs on the front panel of Tiger Serve1 allow you to monitor the system status.
You can monitor the system activity without removing the front panel bezel:
Indicator LED color
system activity LED green
green
green
network activity LED amber
-
power failure LED red
-
fan failure LED red
-
13
Status Description
solid system is idle
maintenance opera-
slow blinking tions running while
(once a second) system is idle (like
disk defragmenta-
tion, for example)
fast blinking system is busy
(more than 4
times a second)
blinking online
- offline or no trans-
action
solid power supply error
or no power
- OK
blinking error or fan failure
- OK
power status LED
green

Monitoring Connectivity

You can monitor the connectivity of the appliance to the storage using the LED
indicators on the FC ports.
You can monitor the connectivity of the appliance to the network using the LED
indicator on the 1GbE ports (Public and Admin).
FC ports
Your configuration can include a 8 Gb FC card. The FC card is set up to work in auto
mode i.e. its port transmits data depending on the connectivity mode of the storage's
(or the switch's) FC card. You can view the transmission mode through the FC port
using the LED indicators above it. If the FC port LED's light is off the port is inactive.
8 Gb Cards
Indicator LED color
left green
right green
both green
Hardware Monitoring: Hardware Monitoring
stand by
blinking (power is on, but the
system is not turned
on)
solid power on
Status Description
solid 2 Gb mode
solid 4 Gb mode
solid 8 Gb mode