Tiger Serve1 Assembly Manual page 11

Tiger Serve1 Assembly Guide
Plug one end of the fibre optic cable into the SFP socket of the FC port.
3.
Do one of the following:
4.
• Plug other end of the fibre optic cable in the port of the Fibre Channel card of the
storage.
• Plug other end of the fibre optic cable in the port of the Fibre Channel switch that
is connected to the shared storage.
If you opt for interconnection via switch, refer to your switch documentation
Note:
for further setup instructions.
To interconnect Tiger Serve1 through the 10GbE port:
Your Tiger Serve1 shipment doesn't include copper and fibre optic cables.
Note:
11
Remove the protective black cap from the 10GbE port.
1.
If your fibre optic cable has protective caps, remove them.
2.
Site Installation: Cabling Tiger Serve1