Waking Up Your Spro; Turning On/Off The Projector - Zte SPRO Quick Start Manual

Waking Up Your Spro

Your Spro automatically goes into sleep mode when it is not in use for
certain time. The touch screen is turned off to save power and the keys are
locked to prevent accidental operations.
You can wake up your Spro by following the instruction as below.
1. Press the Power Key or touch the Sleep/Wake Up Key to turn the
touch screen on.
2. Touch and hold on the screen.
NOTE:
If you have set an unlock pattern, a PIN or a password for your Spro, you'll
need to draw the pattern, or enter the PIN/password to unlock your Spro.

Turning On/Off the Projector

You can use the projector embedded in your Spro to project the display
onto large surfaces.
Touch the Projection Key to toggle the projector on or off.
15