Inepro pospro User Manual page 52

Configuration
[system]
Type of EFT terminal=0
Print EFT ticket=0
Print EFT reports=0
EFT terminal time synchronisation=1
Early swipe=0
IP address gateway=
Comport EFT device=0
[end of day]
Print report01=0
Print report02=0
Print report03=0
Print report04=0
Print report05=0
Print report06=0
Print report07=0
Print report08=0
Print report09=0
Print report10=0
46 - PosPRO
The connected type of EFT terminal:
0=<No terminal connected>
1=HFT201 - PIN only
2=HFT201 - Creditcard only
3=HFT201 - ChipKnip (Dutch system) only
4=BAXX (Norwegian system)
5=PayCon Connected EFT terminal
6=Xenta / Xenteo terminal
7=CCV / CTAP terminal
Print the EFT log on the receipt (0=No, 1=Yes)
Print the EFT reports (0=No, 1=Yes)
Synchronize the realtime clock of the till with the time from the
EFT terminal
Activate the early swipe option of the EFT terminal (0=No,
1=Yes)
IP-address of the EFT gateway
COM port on which the EFT terminal is connected
Use the Terminal report in the end-of-day report
Use the Department report in the end-of-day report
Use the Article report in the end-of-day report
Use the Payment Type report in the end-of-day report
Use the Revalue report in the end-of-day report
Use the Card report in the end-of-day report
Use the Product Changes report in the end-of-day report
Use the Hour report in the end-of-day report
Use the Cost Centre report in the end-of-day report
Use the Cost Centre Detail report in the end-of-day report