Inepro pospro User Manual page 26

Setup
1. Click on
2. Read the licence and if the terms have been accepted, tick "I accept the licence agreement" and
click on
3. Browse to the path (or typ it in) of the location where the software should be installed, and click
on
4. Select the components that should be installed. A pre-selection can be chosen by clicking on the
combobox. Or make a selection by ticking or unticking the checkbox.
Installation
Full Installation
DocuPRO (server)
Inepro Client
Terminal Sever
Inepro Database
Click to continue.
20 - PosPRO
to continue with the installation of the PosPRO on the computer.
.
again.
Description
Installation of all components.
components will be needed!
Managing the print traffic.
not needed in this model type / configuration!
The client pop-ups will be the graphical user interface will show the printjobs and the
Print Codes if available.
model type / configuration!!
Provides the communication between the database and the terminals.
install the Terminal Server, this is not needed in this model type /
configuration!!
This option will install the system database on this machine.
if this is a stand-alone machine. If it is not a stand-alone machine do not
install the database here, but link the manager to the central database.
Do not install all the components, not all
Do not install the DocuPRO server, this module is
Do not install the client, this is not needed in this
Do not
Install the database