Inepro pospro User Manual page 51

[general] (continued)
Obligation of Customer Data=1
Card payment only for sunbed=0
Use Card-Credits=0
Card-Credits value=1
Sunbed discount on seperate row=0
Use cleaning status=0
Use skintype detection=0
Loader customer form=0
Extended loader reports=1
Tender overview=0
External loader application=
External marketing application=
Loader accept cash=1
Activate Subscription=0
Minimum hours between session=0
Minutes before reservation=0
Minutes to start reservation=0
Sunbed time in seconds=0
SelectedTimeConfirmation=0
Void allowed=1
[paycon]
Comport paycon=0
PayCon balancetype 1=5
PayCon balancetype 2=19
Paycon2 port=
Use timer Paycons=0
Print EFT ticket=0
Print EFT reports=0
Type of EFT terminal=0
Amount preset1=100
Amount preset2=100
Amount preset3=100
Amount preset4=100
[printer]
OPOS devices available=1
Laserprinter available=0
Print direct=1
Print VAT receipt=1
Print duplicate receipt=0
Forced closedrawer check=0
Ticket layout=2
Print VAT Mark for every item=0
Print discounts on receipt=0
Print large code for Picture Items=0
Print name=0
TMT90=0
Print customer name on receipt=0
NOT USED IN POSPRO APPLICATION
NOT USED IN POSPRO APPLICATION
NOT USED IN POSPRO APPLICATION
NOT USED IN POSPRO APPLICATION
NOT USED IN POSPRO APPLICATION
NOT USED IN POSPRO APPLICATION
NOT USED IN POSPRO APPLICATION
NOT USED IN POSPRO APPLICATION
NOT USED IN POSPRO APPLICATION
NOT USED IN POSPRO APPLICATION
NOT USED IN POSPRO APPLICATION
NOT USED IN POSPRO APPLICATION
NOT USED IN POSPRO APPLICATION
NOT USED IN POSPRO APPLICATION
NOT USED IN POSPRO APPLICATION
NOT USED IN POSPRO APPLICATION
NOT USED IN POSPRO APPLICATION
NOT USED IN POSPRO APPLICATION
NOT USED IN POSPRO APPLICATION
NOT USED IN POSPRO APPLICATION
NOT USED IN POSPRO APPLICATION
Purse Type 1 on the card
Purse Type 2 on the card
The COM port on the PayCon used to connect the PayCon to
the PosPRO till.
1=COM1
etc.
If a PayCon isn't used leave this value empty.
NOT USED IN POSPRO APPLICATION
NOT USED IN POSPRO APPLICATION
NOT USED IN POSPRO APPLICATION
NOT USED IN POSPRO APPLICATION
NOT USED IN POSPRO APPLICATION
NOT USED IN POSPRO APPLICATION
NOT USED IN POSPRO APPLICATION
NOT USED IN POSPRO APPLICATION
Activate the ability to use OPOS devices (0=No, 1=Yes)
Is a laserprinter connected to print out the reports? (0=No,
1=Yes)
Print a receipt directly when the transaction has been
concluded? (0=No, 1=Yes)
Always print a VAT receipt (0=No, 1=Yes)
Always print a duplicate receipt (0=No, 1=Yes)
Activate 'Closed Drawer Check' (check if the drawer is closed at
the end of every transaction (0=No, 1=Yes)
Choose the layout of the receipt (0-4) See page
overview of the available layouts
Print a VAT mark for each item on the receipt (0=No, 1=Yes)
Print the discounts on the receipt (0=No, 1=Yes)
Print the item code large on items that have a photo (0=No,
1=Yes)
Print the name of the customer on the receipt (0=No, 1=Yes)
Activate the alternative layout for the TMT90 printer (0=No,
1=Yes)
Duplicate of the 'Print Name' value
PosPRO.ini
for an
38
Version 7.5.6 - 45