Table of Contents
Advertisement
Buttons & connections
The last cash register had one on / off button used to power off (or power on) the machine. This
cash register has two on / off buttons. It also has a USB connector on the right side so the USB
extension cable is no longer needed.
Turn cash register on / off
On the right side of the cash register the on / off button, hard disk activity LED and USB connector
can be found.
Use this button to turn off the machine when asked by the Inepro support team. Normally the cash
registers will remain powered on to provide Inepro to service the machine out of operating hours.
Turn screen on / off
If the screen must be be turn off, use the on / off button on the front of the screen. This can be
used to save power and to indicate that the cash register is no longer in service at this time.
I/O Interface
Interface used
Default
COM 1
PayCon or Xenta
COM 2
Printer
COM 4
<Not Used>
LAN
LAN
12V In
Power
Hardware installation
Alternative
By default the cash register will have either
Xenta
a PayCon or an EFT Terminal connected to
PayCon
provide EFT payments, but alternatively
Printer
LAN
they can both be connected.
Power
In that last case the PayCon will be used to
identify the customer (and optionally it's
online account), but the EFT Terminal can
still be used for EFT payments.
Version 7.5.6
-
7
Advertisement
Table of Contents
