Battery; Battery Activation And Deactivation - Kidde P4010ACLEDSCA User Manual

10. Battery

BATTERY ACTIVATION AND DEACTIVATION

NOTE: This alarm is powered by 120 V AC with a sealed lithium
battery system. No battery installation or replacement is
necessary for the life of the alarm.
IMPORTANT: Constant exposure to high or low humidity may reduce
battery life.
WARNING! DO NOT ATTEMPT TO OPEN THE ALARM
FOR ANY REASON!
Do not try to repair the smoke alarm yourself. No serviceable parts
included.
Low battery: This alarm is equipped with a low battery monitor
circuit. While powered by AC, the amber LED will blink 2 times a
second, and the unit will chirp once a minute, followed by the voice
message "Low Battery! Pile Faible!" When powered in DC Battery
Backup mode, the alarm will continue to chirp and blink every 60
seconds, but the voice message will occur once every 15 minutes. This
will continue for a minimum of seven (7) days in DC Battery Backup
mode.
THE UNIT MUST BE DEACTIVATED (see "Deactivation of Alarm"
section) and replaced within 7 days of the first occurrence
of the "Low Battery Warning" to provide continuous alarm
protection.