Troubleshooting - Hytera PD785 Manual

Alert: The radio will sound default alert.
LED: The LED glows green.
LCD: If your dealer enables the feature "Display Decode ID", the radio will display the
appropriate call icon (Private Call:
alias of the transmitting party (ID of the transmitting party will be displayed if it is not in
the contact list). If your dealer does not enable the feature "Display Decode ID", the
radio will display the appropriate call icon only.

Troubleshooting

Phenomena
The radio can not
be powered on.
During receiving
signals, the voice is
weak,
discontinuous or
totally inactive.
; Group Call:
Analysis
The battery may be
improperly installed.
The battery may run out.
The battery may suffer from
poor contact caused by dirtied
or damaged battery contacts.
The battery strength may be
too low.
The volume may be set to a
low level.
The antenna may get loose or
may be improperly installed.
The speaker may be blocked
or damaged.
; All Call:
Solution
Remove the battery and
attach it again.
Recharge or replace the
battery.
Clean the battery contacts. If
the problem can not be solved,
contact your dealer or
authorized service center for
inspection and repair.
Recharge or replace the
battery.
Increase the volume.
Power off the radio, and
re-install the antenna.
Clean surface of the speaker.
If the problem can not be
solved, contact your dealer or
) and
35