Feathercraft Kahuna Manual page 21

A
B
19 INSTALLING SEAT.
• Webbing at top of seat goes through crossrib, over top,
connecting to buckle.
• Webbing at front of seat reaches the large crossrib and
attaches around the side of the crossrib. Connect to
ladderlock to fasten.
• Note: Webbing goes above chine bar.
20 INFLATE SPONSONS.
• Turn the top of the valve to open. When inflating sponsons,
alternate sides to ensure the frame remains centered. The air
pressure from the sponsons can shift the frame within the
skin. Keep blowing until the skin is nice and tight. Twist
top cap to close. Tuck sponson tubes and valves out of the
cockpit area. Avoid stepping on the hose and valve, and
try to keep the valve free of sand.
Feathercraft
Kahuna
20