Feathercraft Kahuna Manual page 10

Note: Bow deck bar
has slight bend
Bow Frame Section
White spacers
3 ATTACH SMALL CROSSRIB TO BOW SECTION.
• Pin on small crossrib is inserted into hole in plastic block on
keel tube; fit into place.
• Snap chine and gunwale tubes on to crossrib.
When the crossrib is in position, the white spacers are on
the "cockpit" side of the crossrib.
4 COMPLETE BOW SECTION.
• Slide foot braces on to track. If necessary, the foot plate on
the brace can be reversed.
5 STERN SECTION.
• Repeat Step #2 and #3.
6 UNFOLD SKIN.
• There are two Velcro-tab
closures on the inside of the
hull. These are located through
the main cockpit opening,
bow and stern.
Feathercraft
Kahuna
9