Remote Control; Accessories; Special Tips - VIETA VH-BS450BT User Manual

Remote Control

1. Power On/Standby button.
2. Mode button (Bluetooth/USB/Aux-in).
3. Mute button.
4. Play/Pause/Hands-free button.
Hands-free function:
- Answer call: Short press Play/Pause/Hands-free button.
- End call: Short pressPlay/Pause/Hands-free button again.
5. Previous track.
6. Previous track.
7. Bass- button.
8. Bass+ button.
9. Repeat button.
10. RANDAM button.
11. Vol- button.
12. Vol+ button.
Notes:
The Repeat button can only available in USB mode, it is not available in Bluetooth and Aux-in Modes.
20
Bluetooth NFC 2.1 Speaker
Power Sources
Power of Main unit
T h i s u n i t i s d e s i g n e d o r o p e r a t e d o n A C 1 0 0 -
240V~50/60 Hz household mains supply, connect the
AC cord into a convenient AC wall outlet.
Power of Remote Control
To use the remote control, please ensure the remote
control battery CR2032 (included) is installed properly
and take the insulation clarity paper out.(Once you
stop to use the remote control, please Insert in it same
as before). Replace the remote control battery when it
stops working. It is highly recommended to use a good
quality button cell.
Battery Note And Care
• Danger of explosion if the battery is replaced
incorrectly. Replace only with the same type battery.
• Only use a good quality known brand battery to
ensure the longest life and best performance.
• If the remote is not to be used for an extended period
of time, remove the battery. An old or leaking battery
can cause damage to the remote and may void the
warranty.
• Do not dispose of batteries in fire. Batteries may leak
or explode.
• Do not try to recharge batteries that are not intended
to be recharged; they can overheat, rupture and leak
(Follow battery manufacturer's directions).

Accessories

1 x Remote Control (include button cell CR2032).
1 x User manual.
1 x Line-in cable.
Getting Started
WARNING: Do not apply power to the unit until all of
your connections are made.
1. Plug the AC cord plug into a convenient AC wall
outlet.
2. The LED indicator will be lights up with 'Red' color.
The unit enters into 'STANDY BY' Mode.
3. Press the Button on main unit or remote control to
turn on/off the unit.
4. Remove the AC cord out of the wall outlet if you want
to switch off the main voltage completely.

Special Tips

How to change the play mode
Press the MODE Button during power on, the play mode
will be changed from Bluetooth mode, USB mode, AUX-
IN mode, meanwhile, the LED light will be with different
colours as following:
Blue color for Bluetooth mode.
Purple color for USB mode.
Cyan color for Aux-in mode.
Playback via Bluetooth
Bluetooth involves a technology for wireless radio
connection of devices over a short distance. Devices
with Bluetooth standard are transmitting between 2.402
and 2.480 GHz in the ISM band (Industrial, Scientific
and Medical). Interference can be caused for example
by WLAN-networks, DAB radios, cordless phones, or
microwave ovens which work on the same frequency
band.
This device offers you the possibility to use a Bluetooth
enabled device. The functional radius is limited to
approx.10 metres depending on the surroundings and
the unit used.
If your playing device supports the A2DP profile
(Advanced Audio Distribution Profile) and has a music-
player function, then you can also wirelessly transfer
music to the device. The A2DP profile involves a multi-
vendor Bluetooth profile. By streaming, stereo-audio
signals are wirelessly transferred between the playing
device (source) and the receiving device.
Due to the different device manufacturers, models,
and software versions, a full functionality cannot be
guaranteed.
21
ENGLISH