HIMS E-bot ADV User Manual page 47

When using near view, the image freezes when the OCR button
on the wireless controller is pressed. The text displayed on the
frozen screen is recognized then read aloud using the internal TTS
voices.
※ Note: While recognition is being performed, a message
indicating recognition is in progress appears. Please do not
perform other functions while recognition is in progress.
Press the Play/Pause button to stop and start reading text aloud, if
the Play/Pause button is pressed after text reading has completed,
reading begins again from the beginning of the text.
Press the OCR button again to exit the OCR function and return to
live camera viewing.
※ Note: If the magnification level is changed during viewing of
recognized text, the magnification level is changed by using the
zoom in / out buttons. However, if the OCR view is set to image,
the magnification
magnification level that was set when OCR was first initiated.
※ Note: You may change the Color mode by using the Mode
button when viewing an OCR scan. The available color modes
are the same as those available in near view mode.
※ Note: You may adjust the Contrast by pressing the Enter
button and Zoom In/Out button simultaneously on the wireless
controller when viewing an OCR scan.
※ Note: While OCR is being performed, you can only set the
"OCR View", "Voice Settings" and "OCR Correction".
8.4.1 Reading/Navigating Recognized Text
Press the Right arrow key to move to the next sentence.
Press the Left arrow key to move to the previous sentence.
Press the Down arrow key to move to the next paragraph.
Press the Up arrow key to move to the previous paragraph.
Navigate to the place where you want to begin reading text aloud
level cannot be adjusted
P a g e | 47
below the