Presetting Fm Stations Manually; Listening To Preset Stations - Denon RCD-M39 Owner's Manual

Presetting FM stations manually

This unit can be preset with a total of 40 FM broadcast stations.
1
Tune in the station you want to
preset.
2
ENTER
Press .
The minimum number display "P– –" for
the unregistered preset flashes.
3
Use 0 – 9 , +10 or CHANNEL – , +
to select the number to be preset,
then press ENTER .
The reception frequency and reception
mode are preset and the display
switches to the station name input
display.
NOTE
When the registered preset number is
selected, " * " is displayed.
To overwrite this preset number, press
ENTER
.
DISC
4
Input the station name.
Names of up to 8 characters can be input.
u, i
• button ..................... Selects the character.
p
• button .......................... Moves the cursor to the right.
CLEAR
• button ................... Deletes the currently selected
character.
• Characters that can be input.
A ~ Z, 0 ~ 9, ^ ' ( ) + , - . / = (space)
z
• If you do not want to input a station name, press
inputting anything else.
• If you make a mistake when inputting, perform the procedure
again. Whatever was previously input is overwritten.
5
Press ENTER .
The characters you have input are entered.
• To give names to other stations, repeat steps 1 to 5.

Listening to preset stations

Use 0 – 9 , +10 or CHANNEL –, + to
select the preset number.
15
Setting the preset channels and changing
the received frequency on the main unit
8/–, +/9
on the main unit can be used both for switching the
preset channel and for tuning.
Before operating them, switch the main unit to the "preset mode" or
"tuning mode" using the procedure below.
1
SETUP
Press .
ENTER 2
without
Use ui to select "TUNER
SETUP", then press
p .
3
Use ui to select "MODE
SELECT", then press
p
.
4
ui
Use to select "PRESET
MODE" or "TUNING MODE",
ENTER
then press
Press
PRESET MODE
preset channels.
• This is the same operation as
on the remote control unit.
Press
TUNING MODE
change the received frequency.
• This is the same operation as
remote control unit.
Listening to FM broadcasts
ENTER
or
ENTER or
.
8/– +/9
, on the main unit to switch
CHANNEL –, +
8/–
+/9
, on the main unit to
TUNE–, +
on the