Listening To Fm Broadcasts; Tuning In Broadcast Stations; Auto Preset - Denon RCD-M39 Owner's Manual

Listening to FM broadcasts

Tuning in broadcast stations

Connect the antenna beforehand (vpage 6).
1
TUNER
Press to select the
reception band.
• When "FM AUTO" is selected:
"AUTO" is displayed.
• When "FM MONO" is selected:
"MONO" is displayed.
DAB z
FM AUTO
FM MONO
z RCD-M39DAB only
• You can also perform this operation by pressing
main unit. (For RCD-M39DAB only)
• When the reception band mode is set to "FM AUTO", the "ST"
indicator lights when a stereo broadcast is tuned in.
2
TUNE –, +
Use to select the reception band.
When a station is received, the "TUNED" indication will light.
If the signal is weak and stable stereo reception is not possible, select
"FM MONO" to receive in monaural.
n To tune automatically
TUNE –, +
Press and hold in to tune in stations automatically.
• Stations whose signal is weak cannot be tuned in.
• In the DAB mode, tuning only moves to receivable stations, so
auto tuning is not possible. (For RCD-M39DAB only)
n To stop auto tuning
TUNE –, +
Press .
DISC
Automatically presetting FM/DAB stations

(Auto preset)

This unit can be preset with a total of 40 DAB and FM broadcast
stations.
• A maximum of 30 DAB broadcast stations can be preset.
(For RCD-M39DAB only)
n Auto presetting with the remote control unit
Perform this operation when tuned to an FM or DAB broadcast
station.
1
SETUP
Press .
2
Use ui to select "TUNER
SETUP", then press
BAND/
2 on the
3
ui
Use to select "FM AUTO
PRESET", then press
p .
4
ENTER
Press
ENTER " is flashing.
Broadcast stations
automatically.
n Canceling auto presetting
TUNER
Press or 2.
Broadcast stations whose antenna signal are weak cannot be preset
automatically. If you wish to preset such stations, tune them in
manually.
NOTE
When FM auto preset is performed, the channel currently registered
as the FM preset is deleted, and the newly preset FM broadcast
station is registered to the same number as the deleted channel.
ENTER p
or .
ENTER
or
while "PRESET
are preset
14
n Giving station names to preset channels
Names of up to 8 characters can be input.
1
Tune in the preset channel you
want to name.
2
ENTER
Press twice.
The display switches to the station
name input display.
3
Input the station name.
Names of up to 8 characters can be input.
u i
• , button .......................... Selects the character.
p
• button ............................... Moves the cursor to the right.
CLEAR
• button ........................ Deletes the currently selected
character.
• Characters that can be input.
A ~ Z, 0 ~ 9, ^ ' ( ) + , - . / = (space)
z
4
Press ENTER .
The characters you have input are entered.
• To give names to other stations, repeat steps 1 to 4.