Before Using Your Appliance For The First Time - Oster BVSTEM6601 Series Instruction Manual

APPLIAN CE FO R THE FIR S T TIME
CLEANING AND PRIMING THE UNIT PRIOR TO FIRST USE
Please refer to the "Description of the Appliance" section to familiarize with the
product and identify all parts.
1. Please make sure the unit is off "O" by pressing the on/off "I/O" button located on the
side of the unit. Make sure it is unplugged from the electrical outlet.
2. Remove stickers and labels from the unit.
3. First remove and then wash the water reservoir, the milk reservoir, the porta-filter, the
3 filters and measuring scoop in a mixture of mild detergent and water. Rinse each
thoroughly and place them back into the unit.
4. Refer to the instructions on "PLACING THE PORTA-FILTER" section before placing
or removing the porta-filter and filter from the unit.
5. To clean the inside of the appliance, follow the steps listed on the "PREPARING
CAPPUCCINO" section using water in both reservoirs and no coffee in the filter. Do
not immerse the appliance in water or attempt to reach any of its internal parts.
IMPORTANT - PRIME THE UNIT
To prime unit, run the steam cycle for 90 seconds by following the steps below:
1. Fill water reservoir up to the "MAX" level.
2. Fill the milk reservoir with water up to the "Max Fill" level and slide the milk reservoir
in place. Be sure to push firmly in place.
3. Select one of the filters and place it on the porta-filter. Place the porta-filter in the unit
ensuring it is properly locked and place a cup under it. Also, make sure the tip of the
frothed milk dispensing tube is pointing inside the cup.
4. Plug the appliance into the appropriate outlet.
5. Turn the power button on "I".
6. The 3 control panel lights will start blinking. Once these lights become solid, press the
Espresso button " " and hold it for 3 seconds, then release it. Once the pump starts,
let the water flow for up to 90 seconds.
7. Press the Espresso button " " once again to stop the process.
8. Press the Cappuccino button " " and hold it for 3 seconds, then release it. Once the
pump starts, let the water flow for up to 90 seconds.
9. Press the Cappuccino button " " once again to stop the process.
10. The 3 control panel lights will turn on solid indicating that the unit is ready to be used.
Now your unit has been primed and is ready to be used.
SELECTING THE RIGHT CUP
Before preparing your beverage, please make sure to select the right cup size according
to the following table:
Espresso
Cappuccino
Latte
BE FORE US ING Y OUR
Ratios by Beverage Type
Single (
Double (
Single (
Double (
Single (
Double (
)
40 ml
)
80 ml
)
180 ml
)
300 ml
)
350 ml
Custom
Sur mesure
)
450 ml
Custom
Sur mesure
6
Custom
Sur mesure
Custom
Sur mesure
Froth
Mousse
Froth Clean
Mousse Nettoyer
Froth Clean
Mousse Nettoyer
Custom
Sur mesure
Froth
Mousse
Froth Clean
Mousse Nettoyer
Clean
Nettoyer
Manual
Manuel
Manual
Manuel