SoundCraft VI 4 Field Manual page 3

Adding Effects
• To add effects select the aux send you wish to feed the effects unit
with
• Press on the fifth box to open the routing pop up
• Press the button below BUS OUT
• Select LEXICON IN from the list on the right
• Choose a effect processor to feed (make sure you select Left and
Right)
• Now select the channel you wish to return the effect down.
• Press the first box on the selected channel to open the routing
window
• Pair the channel with the adjacent channel if you require stereo return
• Press the IN 1 PATCH and select the same effect unit you selected
before
• This should patched the paired channel into the effects unit too.
• To edit the effects parameters press MENU button at the top of the
desk
• Choose FX tab
• Select the effects unit you wish to edit
• To change the effect type press the button below TYPE and choose
from the list