Table of Contents
Advertisement
Cleanning and maintenance
Cleanning and maintenance
If it needs dismantling in maintenance, please do it in the following sequence of instructions.
1.
Turn off the machine and
unplug the power cord
2.
Remove the panel
Press the two buckles at both sides of the
bottom of the panel, lift upward, and you
can remove the panel.
3.
Remove the dust shelf components
Use hands to hold the handle, pull
forward, and remove the dust frame
components.
4 .
Take the HIMOP grid out
Pull the handles, pull it out, and take
the HIMOP grid out upward when the
sound "click" is heard.
5.
Remove the activated carbon filter
6.
Install the machine in a reverse order.
Note
Do not scratch the surface when remove the front
panel. Take care of the protruding part on the back,
if which is broken the machine will not operate.
The back
of front panel
Please be careful!
Protruding part
Do not damage it.
Activated carbon filter
Press
Advertisement
Table of Contents
