Maintenance Guide - Sinclair SP-45A Manual

Maintenance Guide

This product is not recommended to placed on uneven surface to avoid vibration,
noise during working and prevent risk of shock.
To prevent damage, do not put any objects inside the unit.
When not in use for an extended period, unplug it and keep away from children.
To achieve better purification results, place product in an open area, refrain from
blocking air inlet and outlet of unit.
Please switch off the unit and unplug when undergoing maintenance, checks
and moving the unit.
HEPA filter and active carbon filter need to be replaced after been expired.
Please purchase from an authorised dealer.
Maintaining notes
To extend the life of unit, please regularly undergo maintenance. Before maintenance,
please switch off the unit and unplug it. After use, if the filters need to be replaced, the
filter change indicator on the control panel flashes. It reminds of user to replace with a
new filter. HEPA filter and active carbon filter need to be replaced at the same time.
Cleaning instructions
External clean
Before clean the external of the unit, please cut off the power.
- Use soft and clean cloth.
- Do not use alcohol, gasoline, benzol and other chemical cleaner.
Removal of PE bag
Before first time use, please open the front panel, take out the filters and remove its
PE bag wrap - or the unit will not be able to purify the air.
Clean / replace filters
Please follow the pictures on the filter below to correctly install the filter:
As shown in diagram A below: hold both upper sides of the unit, pull out the
front panel and lift it.
Note: The black sponge used in front of the HEPA filter can be washed with
water and can be re-used after dry. It is recommended to wash it every 3
months to extend the life of HEPA filter.
As shown in dragram B: pull down the strap on the filter to take out HEPA filter.
As shown in dragram C: pull down the strap on the filter to take out carbon filter.
Please hold the middle part of the front panel with both hands to install it as
shown in diagram D.
Reminder: HEPA and carbon filters cannot be washed with water.
1
2
Maintenance Guide