Table of Contents
Advertisement
Master Operation
M a s t e r O p e r a t i o n
After it is power on, all the lights on the host would all flash, and then went
out. At this time the machine is in standby mode.
Note: the machine has a function of memorizing unexpected power-down. If the
machine is unexpected power down when it is in operation, it will automatically
return to the state before accidental power failure when the power is on again.
AIR PURIFIER
When the remote control is not around, you can use buttons at the central top of the
machine to operate the machine. The buttons at both ends respectively control on/off
and mode switching of the machine.
Press the "On / Off" button, and the machine starts.
Press the Mode button, every time you press it the machine switches according to the
following sequence. (The indicator will shine as the mode set.)
Note: this button can not adjust the fan speed. The fan speed runs as the machine
set according to the mode.
Note: if the odor sensors in the initialization state when it is power on
Odor —— High fan speed
Sleep —— Mute fan speed
Anion —— Low fan speed
Turbo —— Super high fan speed
Running mode
Dust sensor
Lock
Fan Speed
Mute Low High Turbo Auto
A u t o
Od o r
Fan speed automatically adjusts according to sensor's test results
of the dust and odor concentration.
for two minutes at the first time, the odor detection is invalid.
Mode button
Timer
Clean/Change
Odor sensor
Anion Odor
Dedust filter
Sleep
Slee p
Turbo
Anion
On/off button
Mode
On/off
Advertisement
Table of Contents
