Table of Contents
Advertisement
Wash and maintenance
W a s h a n d m a i n t e n a n c e
1.
Machine Body Cleaning
Dirt on the main frames and desks where the main frames are placed should be
clean as often as possible.
After a long time, dirt would be difficult to remove.
• Use soft fabric
Use a dry soft fabric to remove stubborn dirt.
• No volatile substance
Petrol, thinner and abstergent would cause damage to machines.
• No detergent
Chemical composition in the detergent would cause damage to machines.
• No water spraying
Shell and other things should not be flushed or washed.
2.
Filter Components Cleaning
When the "cleaning" light on the screen of a machine shines, filter components
should be cleaned.
• Use a vacuum cleaner first, then use water to wash the components.
• If the components are very dirty, use neutral household detergent, or after using
the vacuum cleaner, use a cleaning rag or a soft-hair brush, then use water to wash
until no residuum is left.
• After cleaning, fix the filter components again. Press the mode button for 5
seconds in the holding state, time remark would be zero cleaning, and the
"cleaning" light would turn off.
3.
Sensor
Use a vacuum cleaner to remove the dust on the detection port surface of smell sensor and dust sensor.
AIR PURIFIER
Dust sensor
Running mode
Dust sensor
Lock
Fan Speed
Mute Low High Turbo Auto
Sleep
Anion Odor
Timer
Clean/Change
Odor sensor
Mode
Dedust filter
Odor sensor
On/off
Advertisement
Table of Contents
